REDTIGER F7N Dash Cam Hardwire Kit

REDTIGER New Release Visit the Store

Product Description The REDTIGER F7N Dash Cam Hardwire Kit is compatible with the USB-C F7N Series Dash Cams.

Warm Tips: 1. Ensure the ACC (Accessory) and BAT (Battery) connections are correct. 2. Feel free to reach out to us if you need any professional assistance. 3. Use the dedicated hardwire kit designed for the REDTIGER F7N/F7NP/F7NS/F7NT dash cam, as other brands may not be compatible. 4. The hardwire kit is 11.5ft long, suitable for most trucks, SUVs, and other vehicles. 5. Installation steps may vary based on the vehicle model and specific conditions. Refer to the vehicle manual or seek professional help before installation.

Instructions for Installation: 1. Ensure everything is ready and safe before installation. 2. Locate the car's fuse box, typically under the dashboard on the driver's side or in the engine compartment. 3. Identify the ACC (Accessory) fuse slot, which provides power when the ignition is on, and the constant power fuse slot, which provides power even when the ignition is off. 4. Connect the red wire from the hardwire kit to the ACC fuse slot and the yellow wire to the constant power fuse slot, using a fuse tap or adapter. 5. Find a suitable grounding point near the fuse box, a metal surface securely connected to the vehicle's chassis. 6. Connect the black wire from the hardwire kit to the grounding point using a ring terminal or a suitable grounding connector. 7. Tuck away any excess wires and ensure they are safely routed to avoid interference with the vehicle's controls. 8. Test the hardwire kit by turning on the ignition. The dash cam should receive power and start functioning.

Low Voltage Protection: The Redtiger Hardwire Kit features a low voltage protection mode that cuts off power when the voltage drops below 11.8V(±0.2), ensuring the safety of your vehicle's battery.

Universal Compatibility: Designed to fit various vehicle models, the 11.5ft long Redtiger Hardwire Kit is compatible with 12-24V vehicles, providing a versatile solution for your dash cam installation needs.

24H Parking Monitoring and G-Sensor: The Redtiger hardwire kit, connected to the car fuse box power, can continuously supply power to the dash camera for 12/24/48 hours, even when the car is turned off. You can also set a G-sensor for the dash cam, which will automatically start recording and lock the key video when your vehicle suffers from vibration or collision.

Installation Tips: - The yellow cable (B+) should be connected to the fuse of the constant power supply in the car fuse box. Use a voltage tester to ensure it still has electricity even when the car engine is off. - The red cable (ACC) should be connected to the ACC (Accessory) fuse slot in the fuse box, which provides power when the ignition is on. The tester bulb will light when the engine is on and won't light when the engine is off. - The black cable (Ground) should be connected to the metal parts of the vehicle, such as screw nails or metal parts near the fuse boxes.

product information: